| Temper[状态] | As Rolled |
| Thickness[厚度] | 1mm |
| Typical Analysis(典型分析) |
| Ag | <5 PPM |
| Al | 10 PPM |
| As | <5 PPM |
| Ba | <20 PPM |
| C | 500 PPM |
| Ca | 5 PPM |
| Co | 5 PPM |
| Cr | <10 PPM |
| Cu | 5 PPM |
| Fe | 50 PPM |
| H | 5 PPM |
| K | 5 PPM |
| Mg | <5 PPM |
| Mn | <5 PPM |
| N | 5 PPM |
| Na | 5 PPM |
| Ni | 5 PPM |
| O | 20 PPM |
| P | 5 PPM |
| Pb | <5 PPM |
| S | 5 PPM |
| Si | 5 PPM |
| Ti | 5000 PPM |
| W | 200 PPM |
| Zr | 700 PPM |
| Thermal Properties(热性能) |
| Coefficient of thermal expansion ( x10⁻⁶ K⁻¹ ) | 5.300 @20-100℃ |
| Maximum use temperature in air ( C ) | 400 |
| Melting point ( C ) | 2500.00 - 2600.00 |
| Specific heat ( J K⁻¹ kg⁻¹ ) | 305.0 @23℃ |
| Thermal conductivity ( W m⁻¹ K⁻¹ ) | 126.00 @23℃ |
| Mechanical Properties(机械性能) |
| Elongation at break ( % ) | < 20.0 |
| Modulus of elasticity ( GPa ) | 320.0 |
| Tensile strength ( MPa ) | 560.00 - 1150.00 |
| Electrical Properties(电气特性) |
| Electrical resistivity ( μOhmcm ) | 5.3-5.5 |
| Physical Properties(物理性质) |
| Density ( g cm⁻³ ) | 10.220 |